|
Fuel Maintenance & Care
Overview
Standby and prime power generator installations are required to provide
immediate power for the length of power outages. To do this you need to
send clean fuel to the engines. If you have stored fuel, attention should
be given to the condition of this fuel. Sludge accumulates at the tank
bottom over time. This sludge is acidic and eats at tank walls. This
sludge then clogs the filters. If downtime is not an option we have the
solution.
 |
 |
| Before and After |
Sludge |
| Automated Fuel Filtration Systems |
|
The Algae-X Automated Fuel Polishing System is a
necessary component of any facility that stores large amounts of
fuel. These systems function automatically. The operation is
controlled through an electronic timer and safety circuit. The STS
series of fuel filtration equipment starts and stops at an operator
programmed time. Containing all safeties, this system operates hands
free until you need to change the filters. These feature packed
machines will automatically filter at a rate of up to 25 GPM, or
1500 gallons per hour. These systems are designed for mission
critical operations and clients with large amounts of stored fuels.
Eliminate annual tank cleaning and the worry about stored fuel
quality with the addition of the STS Automatic Fuel Filtration
System.
|
View
Data Sheet
View
Data Sheet |
| Redundant Remote Monitored Fuel Filtration |
|
Uptime is your number one priority. Mission critical equipment needs
mission critical components. Do not take chances on sub quality filter
assemblies. Let us show you how the DHR Series filters will change the
way you look at filters. The DHR Series fuel water separator has a
maximum total fuel flow rate of up to 2060 GPH (7,800 L/ph). At maximum
flow 99.9% water separation is achieved with approximately 10 times less
restriction through a 5 stage filtration process. A small overall
footprint, compact design, multiple inlet/outlet configurations allow our
filters to be installed in many locations and applications where other
larger and bulkier filters may not fit. Operation is simple with a single
lever valve that can switch between filters at full load providing fail
safe operation and pointing to the active filter. The push and turn drain
valve provides safety and avoids accidents. The DHR Series are
preconfigured for the RMS-60 Remote Filter Monitor easy upgrade.
|
|
|
DHR-600 Shown
W x H x D = 31.75" x 22.5" x 13.5" (8.5" w/o handle)
630 GPH Flow Rate Per Filter |
|
View
Data Sheet
View
Data Sheet |
|
